CAPA Performance

CHECK OUT OUR NEW WEBSITE - WWW.CAPAPERFORMANCE.COM.AU


	Products by Vehicle
	2018 Mustang V8 15-17 Mustang V8 HSV Gen-F LSA Camaro LT1 More Vehicles..


	Products
	Supercharger Kits Supercharger Head Units Supercharger Kit Parts Supercharger Rebuilds and Repairs Fuel Systems Engine Management Holden Power Parts LSA Power Parts Camaro Power Parts Ford Power Parts Chrysler Power Parts Clothing & Merchandise

Home > Technical Library > Supercharger Speed Calculator

Supercharger Speed Calculator

To Calculate the maximum speed of your Supercharger's Impeller or Rotors:

Maximum Impeller / Rotor Speeds
Vortech V-3 Sealed Unit (CAPA Oil System) - 50,000rpm
Vortech V-3 Oil Feed & Drain w/ Air Assist - 58,000rpm
Vortech V-7 JT Oil Feed & Drain w/ Air Assist - 60,000rpm
Vortech V-7 YSi Oil Feed & Drain w/ Air Assist - 65,000rpm
Powerdyne BD-11A - 38,000rpm
Eaton Supercharger - 18,000rpm

Ratios
Vortech w/ Helical Cut Gearbox (eg V-2, V-3) - 3.6:1
Vortech w/ Straight Cut Gearbox (eg V-1, V-7) - 3.45:1
Vortech V-20 and V-30 - 4.21:1
Paxton Novi 1000 / Novi 2000 - 3.5:1
Powerdyne BD-11A - 3.05:1
Eaton Supercharger (No Overdrive) - 1:1
Magnuson TVS Gilmer Rear Overdrive (3.5"/3.0") - 1.167:1
Magnuson TVS Gilmer Rear Underdrive (3.5"/3.0") - 0.857:1
CAPA Magnuson TVS Gilmer Rear Overdrive (36T/30T) - 1.2:1
CAPA Magnuson TVS Gilmer Rear Underdrive (30T/36T) - 0.833:1

Crank Pulleys
LSA Factory S/C Drive - 7.8"
VE-VF LS V8 Factory (P/N: 1117N) - 7.52"
VE-VF LS V8 Race (P/N: 1117SS) - 7.36"
VT-VZ LS V8 Factory (P/N: 1480ST) - 7.52"
VT-VZ LS V8 Race (P/N: 1480SS) - 7.36"
CAPA 8-Rib Crank Pulleys 205mm - 8.07"
CAPA VT 5.0L 180mm (Sold Pre-2020) - 7.09"
CAPA VT 5.0L 205mm (Sold 2020 On) - 8.07"
CAPA VN-VS 5.0L 205mm - 8.07"
CAPA Gilmer Crank Pulleys - 78T

Notes:
For LS-1 8-Rib Power Steer Drive Kits, enter the Crank Pulley Diameter, NOT the Power Steer Pulley Diameter.
For LS-1 Gilmer Power Steer Drive Kits, please use the Gilmer Power Steer Calculator (Link).