|
|
|
Holden Fuel Injectors
P/N: See Injectors Page
We have a wide range of Injectors to suit Late Model Commodores. Please refer to the fuel injectors page for injector sizes and pricing.
LS1
Full Length, Minitimer / Jetronic (Early) Connector
LS2 / Alloytec
3/4 Length, USCAR (Late) Connector
L76 / L77 / L98 / LS3 / LSA
Short Length, USCAR (Late) Connector |
|
|
|
|
Holden Commodore VE V8 Fuel Pump Upgrade
P/N: VEFPM-ZL1
'Drop In' replacement fuel pump suitable for all Pre E-85 VE V8 Commodores (up to HSV E2). Includes all lines and loom required for a complete installation. Supports up to 700rwhp.
|
|
|
Holden Commodore LS-1 Fuel Pump - Intank Module 255lph
P/N: VZ8FPM-255
Note: VT-VZ - Please Specify Vehicle Type (Sedan / Ute) when ordering.
Note: LS-1 Fuel Pump not suitable for VZ 6.0L. Please call for pricing.
|
|
|
Holden Commodore LS-1 Fuel Pump - Intank Module 420lph
P/N: VZ8FPM-420
Note: VT-VZ - Please Specify Vehicle Type (Sedan / Ute) when ordering.
Note: LS-1 Fuel Pump not suitable for VZ 6.0L. Please call for pricing.
|
|
|
|
|
Vortech Maxflow Fuel Pump Booster - Programmable
P/N: 5A102-0XX
- Pre-Programmed for various applications, including:
- 2011-2014 Ford 5.0L Mustang GT (5A102-029)
- 2010-2012 Chevrolet 6.2L Camaro SS (5A102-035)
- 2006-2010 Dodge/Chrysler 6.1L SRT8 Car (5A102-031)
- 2006-2010 Jeep 6.1L SRT8 Grand Cherokee (5A102-032)
- Allows desired voltage output curve to fuel pump to be set.
- Installation wires and components included.
|
|
|
Vortech Maxflow Fuel Pump Booster - Non-Programmable
P/N: 5A002-030
- Non-Programmable
- Increases Voltage to 17.5 Volts.
- 40 Amp Fuse
- Can be used various applications:
- Normally Aspirated
- Turbocharged
- Supercharged
- Nitrous
- Additional Parts may be required in some applications (not included):
- Relay
- Additional 40A Fuse
- Relay Wiring
- Hobbs Pressure or Vacuum Switch and Wiring.
|
|
|
Hobbs Pressure Switch
P/N: HOBBS-PRES
- Adjustable from 1.1psi to 3psi (Set at 2psi)
- Spade Terminals
- Normally Open
- Does not include wiring or terminsals.
|
|
|
Hobbs Vacuum Switch
P/N: HOBBS-VAC
- Adjustable from 1.1" Hg to 22" Hg (30" Hg Vacuum Max)
- #8-32 Screw Terminals
- Normally Closed
- Does not include wiring or terminals.
|
|